A Family You Can Trust
Rating
Reviews
With almost two decades in HVAC at Hydes, Luis is known for efficient, clean installations and clear, friendly explanations that help customers feel confident with their new systems. He plans each job carefully and follows through until everything is running the way it should. Outside of work, he enjoys watching and playing football, and he is proud to continue a family tradition with his father-in-law, who is also an installer with Hydes.
Name: Luis
We needed new HVAC units - got great advice on options at very fair prices - and the installation went extremely smoothly !
Very helpfully l solving the problem
A very experienced workforce
I like Hydes. Competiitve pricing. Excellent communicating. No upselling.
Excellent installation…just waiting for environmental tops to arrive
My AC unit completely stopped working and I had to replace my whole unit asap. They were able to fit me in the next day and my techs were really amazing, polite, fast, and very knowledgeable. Made a really unfortunate situation go smoothly.
Fast and efficient, well done. Thank you.
Estimate to install a 3 ton for bedrooms and a 3.5 ton for the living area. Hyde's to run a computerized heat load calculation to confirm equipment sizing. Financing is available for 0% for 18 months OAC.
Install new 3 ton upflow evaporator coil
Remove existing equipment. Install new ductless split system
Installing 4 Ton American Standard Silver 14 horizontal Split Heat Pump.
The existing invoice details the installation of a 5-ton American Standard Silver 14 horizontal heat pump system, accompanied by a Plenum coil and a Honeywell S 200 Wi-Fi thermostat. In addition to this installation, it is noted that a drywall spacer will need to be removed, and an opening must be cut to facilitate the removal of the existing equipment. It is important to clarify that ceiling repair has not been included as part of the service.
Estimate to cut in new return and modify return ducts. Patch and paint not included
The existing invoice indicates that a ductless system was installed, which included running electrical wiring from the breaker panel to the opposite side of the home. This work was performed through the attic and down the wall using electrical metallic tubing (EMT). The air handler was positioned inside the master bedroom, specifically above the window at the center of the room. Additionally, the outdoor unit was located directly behind the exterior wall, mounted on a pad.
The invoice includes the installation of a 3-ton Silver 14 Up-Flow Condenser along with an evaporator coil for the kitchen and guest HVAC system.
The installation involved the setup of two 4-ton American Standard Gold 17 upflow split heat pump systems. Additionally, a Honeywell S200 WiFi thermostat was installed to provide effective climate control.
Installing 4 Ton American Standard Gold 17 horizontal Split Heat Pump System.
Install new horizontal evaporator coil
Installed (2) 4 Ton American Standard Gold 17 upflow Split Heat Pump System.
Installing 3 ton American Standard Silver 14 heat pump with Coleman air handler.
The work conducted during this appointment involved the installation of a 1.5 Mitsubishi 18 SEER ductless system for the customer's main house. Additionally, a yearly maintenance agreement for the main house systems was established.
Will run electrical from breaker panel to outdoor inside room up high along ceiling and wall. . Breaker panel in room where mini split is located. Remove existing ductless unit and install new 1 ton ducting unit. See photos
Relocate furnace and evaporator coil from garage attic back to original location on water heater platform. Scope of work: Pump down refrigerant into condensing unit. Remove furnace, evaporator coil, plenums from attic. Cap gas line in attic. Mount furnace on existing metal platform on 20x25x1 filter box. Install new upflow evaporator coil. Fabricate new supply plenum. Install new insulated metal duct to garage duct penetration. Install gas shut off with gas flex and sediment trap. Reinstall gas flue pipe. Fabricate and install return drop and connect to original 30x14 wall return. Extend refrigerant lines to new evaporator coil and add filter drier. Run new condensate drain line to outside near hot water heater. Add sweater safety switch. Extend and connect low voltage wiring at furnace. Start up and test system.
The work performed involved insulating the exterior supply and return air ducts located on the roof. This action was taken to enhance energy efficiency and reduce heat loss from the building's HVAC system, thereby contributing to overall improved performance and cost savings.
The following information reflects the work carried out: - **Installation Details**: A 2-ton, 18 SEER ductless system was successfully installed in the garage area.
IID Rebate $1,600
The work conducted involved the installation of a 5-ton American Standard Gold 17 horizontal heat pump system, which includes a variable-speed outdoor unit and a two-speed indoor unit. Additionally, new supply and return plenums were installed, accompanied by a 5-inch media filtration system to enhance air quality and system performance.
>Installing 4 Ton American Standard Platinum 18 POV horizontal Split H/P for living room and 3 Ton American Standard Gold 17 Horizontal Split Heat Pump for bedrooms.
Installing 1.5 Ton American Standard Silver 14 upflow Split Heat Pump System.
Installing (2) 3 ton, 2 ton, 5 Ton American Standard Platinum 20 POV Upflow Split Heat Pump.
The existing invoice details the installation of a Gold 4-ton 15 Heat Pump Package Unit and a Honeywell S200 Wi-Fi thermostat, with a note to reuse the filter rack in the evaporator coil.
The work performed involved the installation of a 3-ton American Standard Silver 14 horizontal split heat pump in the bedrooms. In conjunction with this installation, a Honeywell S200 Wi-Fi thermostat was also installed to enhance climate control within the home.
