Expert AC Contractor Services Tailored for Palm Springs Residents
Since 1972, Hydes Air Conditioning has been providing HVAC contractor services including repair, installation and maintenance to residents in Palm Springs. With over 50+ years serving the area, Hydes is proud to be your preferred 5 star local service provider for all your AC repair and installation needs with 2,600+ Palm Springs reviews below.
Whether you need immediate AC repair, a full system replacement, or preventative maintenance, our approach is built on technical NATE certified expertise, transparent service, and measurable results.
Call today at (760) 360-2202 for your home's HVAC service solutions or contact us online with any questions!
See what your neighbors are saying about our service below!
Need an Electrician in Palm Springs?
We've also added residential electrical service in Palm Springs to our family of home contractor services to better serve the Coachella Valley community.
Palm Springs AC Repair and Service
When it comes to AC repair, installation, maintenance and tune-ups, there’s no better company to call than our team of N.A.T.E. certified HVAC experts near Palm Springs, CA.
-
AC repair for refrigerant leaks, compressor issues, and airflow restrictions
-
New air conditioner installation and system sizing
-
High-efficiency upgrades to reduce energy consumption
-
Seasonal AC tune-ups to prevent costly breakdowns
Ensure your system delivers consistent cooling without overworking components or inflating energy bills.
Why is my AC unit running but not cooling?
Your AC unit may be running but not cooling your home in Palm Springs, CA because:
- Air filters are blocked
- AC unit has a refrigerant leak
- The evaporator coil is dirty or frozen
If you replace your air filters and set your thermostat correctly and it is still not working properly, you should have an HVAC technician repair your AC unit.
How much does AC repair service cost near me?
Minor AC repairs, such as fuses, breakers or thermostat replacement, cost between $150 and $290. You can expect to spend $200 to $1,500 on substantial repairs such as repairing a refrigerant leak or evaporator coil.
Get the Best AC Service Near You
Hydes makes sure to offer you options and practical solutions to fix quickly and get your home cool again quickly 24 hours a day. When your air conditioner starts acting up, it's crucial to address the issues promptly to avoid discomfort and costly repairs down the line.
Common AC Problems in Palm Springs
- Overheating Issues: In our desert climate, AC units often struggle with overheating. This can lead to system shutdowns and reduced cooling capacity.
- Refrigerant Leaks: Leaking refrigerant not only affects cooling but also poses environmental hazards. Prompt repair is essential to prevent further leaks and damage.
- Airflow Problems: Restricted airflow can result from clogged filters or duct obstructions. It reduces cooling efficiency and strains the system.
AC Installation and Replacement
When it comes time to replace your home's air conditioner, you want a licensed HVAC technician to install your new system, and a large investment, the right way. Our team is ready to provide you with a new energy-efficient heat pump and cooling system to keep your home comfortable all year long.
We'll assess your cooling needs, recommend the best options for your space, and handle the installation process from start to finish. Hydes also offers financing for all your HVAC solutions.
High-Efficiency Equipment Options
Hydes will install systems designed to reduce operating costs while improving indoor comfort:
-
Variable-speed air handlers
-
Two-stage and modulating furnaces
-
Smart thermostats with adaptive learning
-
Zoned HVAC systems for targeted comfort control
Energy Efficiency Upgrades That Pay Off
Hydes will focus on measurable efficiency gains that reduce operational costs:
-
SEER and AFUE optimization through modern equipment
-
Smart thermostat integration for automated energy control
-
Duct sealing to eliminate energy loss
-
System balancing to improve airflow distribution
These upgrades translate into immediate savings and long-term ROI.
How much does it cost to replace an AC system?
It will cost between $3,500-$12,000+ to replace an air conditioning unit in Palm Springs, CA. Price will vary based on several factors:
- The size of your house.
- The type of air conditioning unit you have installed.
- The cost to remove your current AC unit.
Heating System Services That Keep You Warm
We provide full-spectrum heating services designed to handle every system type and configuration:
-
Furnace repair and replacement (gas, electric, high-efficiency units)
-
Heat pump diagnostics and installation
-
Boiler service and hydronic heating solutions
-
Emergency heating repair with rapid response times
Our technicians diagnose root causes, not symptoms, ensuring your heating system operates safely and efficiently through peak demand seasons.
HVAC Maintenance Tune-Up Service
Keeping your unit running effectively and efficiently requires regular service. Call us for AC maintenance and tune-up services that will prevent breakdowns and keep your system running well for years.
DIY AC Maintenance Tips for Palm Springs Residents
While professional help is crucial for complex issues, homeowners can also take some steps to maintain their AC units:
- Changing Air Filters Regularly:Clean filters ensure proper airflow and prevent dust buildup within the system.
- Clearing Debris Around the Unit:Keep the area around the outdoor unit clear of debris, vegetation, and obstructions for efficient operation.
Whether your air conditioning unit isn’t cooling your home or you need routine maintenance service, don’t suffer in the heat – give us a call today!
How much does heating and cooling maintenance cost?
For simple tune-ups, regular HVAC maintenance costs $75 to $200. Extended service contracts range from $150 to $500 and cover the entire HVAC system, including heating and cooling.
Indoor Air Quality Solutions for Healthier Living
Comfort goes beyond temperature. Hydes will improve your indoor air quality by using advanced solutions:
-
Whole-home air purifiers and filtration systems
-
Humidity control (humidifiers and dehumidifiers)
-
UV light systems to neutralize airborne contaminants
-
Duct cleaning and sealing services
Cleaner air supports respiratory health and enhances overall comfort throughout your home.
Why Our HVAC Services Deliver Superior Results
We combine technical precision with customer-focused service to deliver consistent outcomes:
-
Highly trained NATE certified HVAC technicians
-
Transparent pricing and detailed service reporting
-
Industry-leading equipment and tools
-
Proven track record of system optimization
-
Commitment to long-term customer satisfaction
Local HVAC Contractors You Can Trust
We’d love to earn your business in Palm Springs, CA!
See what your neighbors are saying about our HVAC installation, repair and maintenance services below.Â
Recent Jobs and Reviews in Palm Springs, CA
Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting high levels of customer satisfaction and appreciation for the service provided. Customers consistently express gratitude and praise for the professionalism, knowledge, and courtesy demonstrated by the technicians. Recurring themes include exceptional customer service, with technicians being described as friendly, respectful, polite, and professional throughout their interactions. Technical expertise is another dominant positive trend, as customers frequently commend the thorough diagnostics, efficient problem-solving, and clear explanations provided during service calls. Many reviewers highlight the promptness and reliability of the service, noting quick response times, punctuality, and efficient completion of work. The dedication to resolving complex or frustrating situations is particularly appreciated, with several customers expressing relief and happiness at having their HVAC and electrical issues successfully addressed. There is also notable appreciation for the transparency and honesty in service delivery, with customers valuing straightforward communication without unnecessary upselling. Long-term customer loyalty emerges as a theme, with multiple reviewers mentioning years of positive experiences and enthusiastic recommendations to neighbors and friends. The overall tone is one of trust, satisfaction, and genuine appreciation for quality workmanship and customer-focused service.
Palm Springs, CA at a glance
Hydes Air Conditioning has completed 25 jobs in Palm Springs, CA in August 2026.
The 25 customer reviews shown here average 5.0 out of 5.
The most recent job was on August 7, 2026.
Hydes Air Conditioning has completed 1,396 jobs in Palm Springs, CA in the last 12 months. The first job there was in March 2014.
Our Local Reviews by City
- Banning, CA (1)
- Bermuda Dunes, CA (862)
- Cathedral City, CA (1235)
- Chiriaco Summit, CA (9)
- Coachella, CA (118)
- Desert Hot Springs, CA (394)
- Indian Wells, CA (1672)
- Indio, CA (9189)
- Joshua Tree, CA (2)
- La Quinta, CA (6827)
- North Palm Springs, CA (8)
- Palm Desert, CA (17249)
- Palm Springs, CA (2753)
- Rancho Mirage, CA (3874)
- Thermal, CA (9)
- Thousand Palms, CA (273)
Job Locations and Reviews
Upon arrival client stated mini split in garage that was installed two days ago leaking water. Found pin hole leak in condensate line, see video and pictures. Sealed leak with glue as well as glen coat tape. Flushed condensate line.
Arrived to replace 10 dimmers with smart dimmers. Additionally I need to install a companion remote switch to one of the dimmers but the one that was purchased was not compatible with new dimmers. I removed and installed an exterior wall sconce near entry. Additionally I converted 8 led lights from 4000k to 2700k. Lastly I removed an old alarm box from closet. I will need to return to replace one 4 inch led lights and install the correct companion remote switch.
Performed cooling maintenance on 2021 American Standard rooftop package heat pump system. Changed out 20 x 20 x 1 filter located in ceiling. Cleared all electrical components of Dustin debris, verified proper sequence of operation, checked volts and amps, checked, capacitors, and verified refrigerant levels took temperature splits and cycled system. Cleared condensation lines and wash condensing coil. Thermostat checked out OK. System is within manufacturers specifications and cooling and operating properly at this time of service. Renewed maintenance plan
Assist over phone
Contacted the member to provide an update regarding the warranty repair. Verified with Howard Industries that the required warranty part has not yet been received, as it is still in transit from the manufacturer. Current estimated arrival is approximately the 9th of this month, although an exact delivery date cannot be guaranteed. Informed the member that we will contact her immediately once the part arrives to schedule the repair. Also explained that warranty parts are supplied directly by the manufacturer, and we do not have control over shipping times or exact arrival dates. Member was updated on the current status and acknowledged the information
Performed annual cooling maintenance on a 2023 American Standard Silver 5ton heat pump. Fau is located in master closet attic access. Cleared condensation line from jones valve. Replaced 20x30 filter located in hallway ceiling. Followed sequence of operations and checked voltage, condenser fan motor amps, compressor start/run amps, capacitor, hard start kit, temperature split, Freon levels, and rinsed condenser coils. Secured all electrical connections. Emerson thermostat checked out operational. System is working properly in cooling at this time of service.
Upon arrival client stated living area thermostat set in heat mode and won’t change with client app. Found thermostat in heat mode and went to put into cool mode however thermostat would not respond to touch. Rebooted thermostat and cycled system. See videos
Today’s call consisted of a return from a prior demand call on 31 July. Client states that the system is making a loud noise whenever the unit is on, but not all the time. After going outside to the unit system was not making noise referred back to the video that the client took when it was making the loud noise and it sounded like the blower blades were hitting the framing of the system when I inspected outside I push down on the blades a little bit and discovered that the plastic lining inside where the blades go was detached and hanging, making it hits the fan blades while the system is running. I opened up the system, reinforce the system altogether added screws that were missing to ensure that the plastic will not fall and hit the blades once more. After repairing the plastic. I went ahead and reassemble the system, framing and push down on the blades again to ensure that the noise is not occurring anymore. I added photos and videos of the before, and after to show that the syste
Installed condenser tops. Set up Wi-Fi. Dropped
2019 Ductless unit from Hyde’s had all loads operational, no fault codes, found system needed refrigerant. Informed about refrigerant leaks and 10- year part warranty, 2- year labor warranty expired. Did not find any leaks at flares, or any visible oil on coils. Added 1 lb of. R410a. System is cooling properly now. Return about 82°. Supply temp. 51°. Filters clean. If system starts not cooling soon or before January 18, 2029 (1/18/29) to sign leak estimate to have leak search done and depending on source of leak will get it replaced under part warranty with labor charge and cost of refrigerant ( not considered a manufacturer part, no warranty on refrigerant).
Dropped off permit and ladder
Installing 2 ton 18 seer Mitsubishi ductless for the garage. Job complete.
Customer concern that kitchen and living room area are warmer than the rest of the house and thermostat changes temperature. Removed schedule from ecobee thermostat so thermostat set temperature will not change unless client changes it. Also thermostat is reaching desired temperature due to bathroom register pointed directly at thermostat. Adjust louvers on restroom to direct air opposite of thermostat.
Upon arrival system was calling for cool but clients concern is during the hardest part of the day the system will just continue to run and not drop the temperature. Further inspection I discovered systems Schrader core was leaking at service port. Install installed new Schrader valve and charge system with 2 pounds of refrigerant. After charging system with refrigerant system is showing signs of a slight restriction. Explained my findings to client and also checked temperature split. Supply air temperatures 53.6° emailed estimate for TXV if unit continues to malfunction
Installed three new run capacitors one for each unit. After installing tested out compressor amps and fan motor amps at this time all three systems are cooling down the house properly and have all new capacitors old ones tested very weak. Also had 10 foot ladder and changed out both 20 x 30 filters located by front door.
Already called an informed member once compressor comes in. We will be calling her to set up appointment.
Discussed cutting in return and return duct enlargement.
Upon arrival home owner showed me water damage coming from side wall in downstairs bedroom. I double checked upstairs across the house bedroom closet to check if there’s any sign of the condensation line overflow or coils overflow. Homeowner also saw there’s no sign of water accumulation. Checked on the roof and there’s also no signs of water leaks coming from the ac unit. Water damage is starting from the floor and moving upwards and is damage occurring from something else not correlated to the hvac system.
Today’s cooling maintenance consisted of one system on the roof. I insured filter has been replaced. Thermostat is properly calling for cooling with no alerts. Cooling sequence of operations have successfully checked out. Capacitor is checking out normal. Blower motor amps is testing out in the correct range. Overall system is operating to the manufacturer specs at this time of today’s annual cooling maintenance.
Installing 3 Ton Bosch 18 SEER Heat Pump Package Unit. We installed a Bosch 3ton package unit and ran new low voltage for both systems with new ecobee thermostats on both systems per Johnathan.
Call and informed member once compressor comes in we will inform her and set up appointment for replacing compressor under warranty
Upon arrival, found the thermostat display blank. Verified the condensate drain and safety float switch were clear and not tripped. Removed the thermostat from the wall and verified proper DC communication voltage was present between the thermostat and air handler. Reset the thermostat, inspected and verified all thermostat wiring connections and wire nuts were tight and secure with no loose electrical connections found. Reviewed equipment history and found no fault codes or indications of recent blackouts or brownouts. Restored thermostat operation and allowed the system to operate for over 10 minutes. Verified normal communication between the thermostat, indoor unit, and outdoor unit. Equipment operated normally throughout testing with no additional issues observed at this time. System is cooling and operating properly upon departure. Service is covered under warranty, but it was installed last year.
Cooling maintenance on two 2012 day and night with systems and American standard split POV system. Air handler and furnaces are located in separate indoor/outdoor closet and garage. Members changed our own filters. Cleared all electrical components of dust and debris, verified proper sequence of operation. Checked volts and amps, checked start and run capacitors. Verified refrigerant levels and took temperature splits and cycled equipment. Cleared condensation lines and washed convincing coils. Thermostats checked out ok. System systems are within manufacturers, specifications and cooling and operating properly at this time of service.
Sn 7P1f bedroom system failed fan motor. Installed new fan motor and tested operation. Equipment is working properly at this time
Homeowner noticed water in return and around garage upflow Lennox furnace and diversitech condensation pump after returning from out of town. Condensate pump had power and all LEDs were on but was completely full. Removed water and checked lift and motor work3d but when filling with water it would not engage lift switch. May be a broken spring. No blockage on drain line , tubing connects to homes primary drain and pumps out to termination point on side yard behind bush. Replaced condensation pump and tubing. Wired into safety cut off to shut off thermostat if pump failed. Tested pump and it’s working properly and draining out. Recommended Hyde’s Family Comfort Club Maintenance Plan for savings on today’s call and any future calls with 2x maintenance visits and other great member benefits and waive minimum diagnostic for signing up today. Homeowner went with just repair and trip charge/diagnostic. 1- year warranty. Attached is maintenance plan for 2-systems if they ever want to sign up
Fernanda did an a plus job - frank
Thank you for being on time thank you for explaining everything in terms I could understand
Second time Chris has been to my house, always professional and on time.
Prompt and courteous, very professional.
Wry courteous, thorough., and helpful.
He was so helpful and took care of the problem very efficiently!
Frank was courteous and efficient. He answered my questions and explained what he was doing. I am always happy to have him service my equipment,
We have their maintenance service for 8 years now and we have no complaints. They are professional and easy to work with. Great company.
Great service!
friendly, explains all well, open and honest, does what he says he will do (in a timely manner )
Excellent service. All the time
Jonathan was prompt, polite, respectful, and very skilled. He found the problem easily and fixed it.
Alex was great. He needs a new picture to show his smile & friendly personality
Alex was friendly, efficient and quick!
Excellent interaction.
Brayan was great! Showed up early in the window slot and got the seasonal maintenance done quickly. Very friendly and helpful. Thanks Brayan!
Totally on time, friendly, knew what was going on.
Very nice Gentleman
Great service
Excellent
On time…thorough…friendly…explained and answered all questions well…
Thorough and informative…assuring in his evaluation…friendly and efficient…
Brayan is a very friendly and very clear in explaining everything that he was checking on my two furnaces. He is very knowledgeable and I felt comfortable with him servicing my equipment.
Brayan was great. Professional courteous and quickly completed the work
Bryan was very personable and answered all of my questions. An excellent service technician.