Expert AC Contractor Services Tailored for Palm Springs Residents
Since 1972, Hydes Air Conditioning has been providing HVAC contractor services including repair, installation and maintenance to residents in Palm Springs. With over 50+ years serving the area, Hydes is proud to be your preferred 5 star local service provider for all your AC repair and installation needs with 2,600+ Palm Springs reviews below.
Whether you need immediate AC repair, a full system replacement, or preventative maintenance, our approach is built on technical NATE certified expertise, transparent service, and measurable results.
Call today at (760) 360-2202 for your home's HVAC service solutions or contact us online with any questions!
See what your neighbors are saying about our service below!
Need an Electrician in Palm Springs?
We've also added residential electrical service in Palm Springs to our family of home contractor services to better serve the Coachella Valley community.
Palm Springs AC Repair and Service
When it comes to AC repair, installation, maintenance and tune-ups, there’s no better company to call than our team of N.A.T.E. certified HVAC experts near Palm Springs, CA.
-
AC repair for refrigerant leaks, compressor issues, and airflow restrictions
-
New air conditioner installation and system sizing
-
High-efficiency upgrades to reduce energy consumption
-
Seasonal AC tune-ups to prevent costly breakdowns
Ensure your system delivers consistent cooling without overworking components or inflating energy bills.
Why is my AC unit running but not cooling?
Your AC unit may be running but not cooling your home in Palm Springs, CA because:
- Air filters are blocked
- AC unit has a refrigerant leak
- The evaporator coil is dirty or frozen
If you replace your air filters and set your thermostat correctly and it is still not working properly, you should have an HVAC technician repair your AC unit.
How much does AC repair service cost near me?
Minor AC repairs, such as fuses, breakers or thermostat replacement, cost between $150 and $290. You can expect to spend $200 to $1,500 on substantial repairs such as repairing a refrigerant leak or evaporator coil.
Get the Best AC Service Near You
Hydes makes sure to offer you options and practical solutions to fix quickly and get your home cool again quickly 24 hours a day. When your air conditioner starts acting up, it's crucial to address the issues promptly to avoid discomfort and costly repairs down the line.
Common AC Problems in Palm Springs
- Overheating Issues: In our desert climate, AC units often struggle with overheating. This can lead to system shutdowns and reduced cooling capacity.
- Refrigerant Leaks: Leaking refrigerant not only affects cooling but also poses environmental hazards. Prompt repair is essential to prevent further leaks and damage.
- Airflow Problems: Restricted airflow can result from clogged filters or duct obstructions. It reduces cooling efficiency and strains the system.
AC Installation and Replacement
When it comes time to replace your home's air conditioner, you want a licensed HVAC technician to install your new system, and a large investment, the right way. Our team is ready to provide you with a new energy-efficient heat pump and cooling system to keep your home comfortable all year long.
We'll assess your cooling needs, recommend the best options for your space, and handle the installation process from start to finish. Hydes also offers financing for all your HVAC solutions.
High-Efficiency Equipment Options
Hydes will install systems designed to reduce operating costs while improving indoor comfort:
-
Variable-speed air handlers
-
Two-stage and modulating furnaces
-
Smart thermostats with adaptive learning
-
Zoned HVAC systems for targeted comfort control
Energy Efficiency Upgrades That Pay Off
Hydes will focus on measurable efficiency gains that reduce operational costs:
-
SEER and AFUE optimization through modern equipment
-
Smart thermostat integration for automated energy control
-
Duct sealing to eliminate energy loss
-
System balancing to improve airflow distribution
These upgrades translate into immediate savings and long-term ROI.
How much does it cost to replace an AC system?
It will cost between $3,500-$12,000+ to replace an air conditioning unit in Palm Springs, CA. Price will vary based on several factors:
- The size of your house.
- The type of air conditioning unit you have installed.
- The cost to remove your current AC unit.
Heating System Services That Keep You Warm
We provide full-spectrum heating services designed to handle every system type and configuration:
-
Furnace repair and replacement (gas, electric, high-efficiency units)
-
Heat pump diagnostics and installation
-
Boiler service and hydronic heating solutions
-
Emergency heating repair with rapid response times
Our technicians diagnose root causes, not symptoms, ensuring your heating system operates safely and efficiently through peak demand seasons.
HVAC Maintenance Tune-Up Service
Keeping your unit running effectively and efficiently requires regular service. Call us for AC maintenance and tune-up services that will prevent breakdowns and keep your system running well for years.
DIY AC Maintenance Tips for Palm Springs Residents
While professional help is crucial for complex issues, homeowners can also take some steps to maintain their AC units:
- Changing Air Filters Regularly:Clean filters ensure proper airflow and prevent dust buildup within the system.
- Clearing Debris Around the Unit:Keep the area around the outdoor unit clear of debris, vegetation, and obstructions for efficient operation.
Whether your air conditioning unit isn’t cooling your home or you need routine maintenance service, don’t suffer in the heat – give us a call today!
How much does heating and cooling maintenance cost?
For simple tune-ups, regular HVAC maintenance costs $75 to $200. Extended service contracts range from $150 to $500 and cover the entire HVAC system, including heating and cooling.
Indoor Air Quality Solutions for Healthier Living
Comfort goes beyond temperature. Hydes will improve your indoor air quality by using advanced solutions:
-
Whole-home air purifiers and filtration systems
-
Humidity control (humidifiers and dehumidifiers)
-
UV light systems to neutralize airborne contaminants
-
Duct cleaning and sealing services
Cleaner air supports respiratory health and enhances overall comfort throughout your home.
Why Our HVAC Services Deliver Superior Results
We combine technical precision with customer-focused service to deliver consistent outcomes:
-
Highly trained NATE certified HVAC technicians
-
Transparent pricing and detailed service reporting
-
Industry-leading equipment and tools
-
Proven track record of system optimization
-
Commitment to long-term customer satisfaction
Local HVAC Contractors You Can Trust
We’d love to earn your business in Palm Springs, CA!
See what your neighbors are saying about our HVAC installation, repair and maintenance services below.Â
Recent Jobs and Reviews in Palm Springs, CA
Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting high levels of customer satisfaction and appreciation for the service provided. Customers consistently express gratitude and praise for the professionalism, knowledge, and courtesy demonstrated by the technicians. Recurring themes include exceptional customer service, with technicians being described as friendly, respectful, polite, and professional throughout their interactions. Technical expertise is another dominant positive trend, as customers frequently commend the thorough diagnostics, efficient problem-solving, and clear explanations provided during service calls. Many reviewers highlight the promptness and reliability of the service, noting quick response times, punctuality, and efficient completion of work. The dedication to resolving complex or frustrating situations is particularly appreciated, with several customers expressing relief and happiness at having their HVAC and electrical issues successfully addressed. There is also notable appreciation for the transparency and honesty in service delivery, with customers valuing straightforward communication without unnecessary upselling. Long-term customer loyalty emerges as a theme, with multiple reviewers mentioning years of positive experiences and enthusiastic recommendations to neighbors and friends. The overall tone is one of trust, satisfaction, and genuine appreciation for quality workmanship and customer-focused service.
Palm Springs, CA at a glance
Hydes Air Conditioning has completed 25 jobs in Palm Springs, CA in April 2026.
The 25 customer reviews shown here average 5.0 out of 5.
The most recent job was on April 7, 2026.
Hydes Air Conditioning has completed 1,396 jobs in Palm Springs, CA in the last 12 months. The first job there was in March 2014.
Our Local Reviews by City
- Banning, CA (1)
- Bermuda Dunes, CA (862)
- Cathedral City, CA (1235)
- Chiriaco Summit, CA (9)
- Coachella, CA (118)
- Desert Hot Springs, CA (394)
- Indian Wells, CA (1672)
- Indio, CA (9189)
- Joshua Tree, CA (2)
- La Quinta, CA (6827)
- North Palm Springs, CA (8)
- Palm Desert, CA (17249)
- Palm Springs, CA (2753)
- Rancho Mirage, CA (3874)
- Thermal, CA (9)
- Thousand Palms, CA (273)
Job Locations and Reviews
Performed a cooling maintenance on a split platinum. Replaced customer supplied filters, washed outdoor unit and cleared condensate drain. Executed refrigerant circuit diagnostic. Subcool temperatures – 11°. System is cooling the home at the time of maintenance.
Performed a cooling maintenance on a split platinum. Replace replaced filter, cleared condensate drain and washed outdoor unit. Refrigerant circuit diagnostic – good. 25° delta T. 9° subcool temperatures. System is cooling the home at the time of maintenance.
Advice client is going to take 7 working days to get coil….see notes
Executed a cooling maintenance on an inverter package unit. Completed Bosch package unit checkpoint form. No error codes or notifications. Replaced filter. System is functioning according to manufacturer specifications.
Performed a cooling maintenance on a split system. Washed outdoor unit, cleared condensate drain line and replaced filter. According to refrigerant temperature and pressure readings, system was slightly undercharged. Balanced subcool temperature with 1.3 pounds of R410a. Electrical motors and capacitors measured according to manufacturer specifications. System is cooling the home at the time of maintenance.
Arrived to remove and replace the exterior wall-mounted sconce on the garage. Replaced the weather-resistant electrical box and installed a new wall sconce.
Check system found system low 2 pounds and capacitor out range replaced capacitor and added 2 pounds of refrigerant advice client no warranty on refrigerant system cooling properly at this time
Today’s an annual cooling preventative maintenance consisted of one American standard silver unit at first, began with ensuring that the Honeywell thermostat is properly calling for cooling and turning the unit on. And then I went and remove the filter from the upflow furnace area located in the closet to wash the filter out as I opened the closet. There was a large gust of cold air coming out of the supply duct at the top of the furnace, a large piece of the sheet metal had disconnected, exposing a large amount of the supplier to be wasted. I went ahead and reinforce the supply duct, adding spray glue and additional foil seal tape, and I also added a few screws to ensure that the reinforcement is able to last and ensure that there is no supply air being wasted. Once I reinforced all of the supplied duct, ensuring that there is no air being leaked or wasted. I went ahead and followed through with the rest of my cooling preventative maintenance which included thoroughly washing the filt
Today’s annual maintenance consisted of one outdoor unit. I first began with ensuring that the filter has been replaced. Clients in fact, replace the filter upon my arrival replacing the filter ensure that proper airflow is able to circulate back to the system at minimal resistance. I then ensure that the thermostat is efficiently properly calling for calling and turning the unit on with no errors occurring. All of the cooling sequence of operations are successfully checking out verifying that there is a proper 20° split being provided and that the home is being cold efficiently to the desired temperature. The amps on the system are successfully testing now in the correct range following with the capacitor also safely testing out efficiently in the correct range. I then thoroughly cleared the condensation line to remove all accumulated water that may be in the line and ensure that it is properly draining at this time. I then thoroughly washed the coils down of the system to remove all
Upon arrival blower working condenser wasn’t Fernanda install eco bee thermostat Re wire thermostat tested
Today’s annual cooling preventative maintenance consisted of one system. I first began with replacing the 20 x 25 filter located in in the closet access in the garage. And replacing the filter ensures that there is proper airflow, able to circulate back to the system with minimal resistance and then cleared the condensation line from the system to ensure that proper drainage is occurring at this time. All of the cooling sequence of operations have successfully checked out, verifying that the new ecobee thermostat is properly calling for cooling and turning the system on with no errors occurring, and the system is efficiently providing a 20° split to ensure that the home is being called efficiently to the desired temperature. During the installment of the new ecobee thermostat replacing the Honeywell thermostat the frame fitting that attaches to the wall from behind the ecobee was not successfully able to be attached to the wall due to the area of the thermostat installation had a frami
Today’s an annual preventative maintenance consist of two American standard units. One was a package unit, and the other is a gold standard system. I first began with replacing bolt filters in the house to ensure that proper airflow is able to circulate back to the units from each system at minimal resistance. I then cleared the condensation line for the gold system to ensure that proper drainage is occurring on the unit. All of the cooling sequence of operations are safely checking out for the gold American standard unit verifying that there is a proper 20° split. The amps on the system are also safely testing out in range following with the capacitor also testing out safely. The package unit is safely testing out in range and verifying that there is a proper temperature split to ensure that the home is cooling efficiently. For the package unit, the client did inform me that every time it runs the water is leaking everywhere instead of efficiently draining out of the condensation line
Upon arrival found condensation line full of water,,,,,clean condensation line line,,,,wave diagnostic,,,,,client,,,,, not to happy with pricing
Today’s annual cooling preventative maintenance consisted of one Bosch unit. I first began with replacing the 24 x 24 filter in the home to ensure that proper airflow is able to circulate back to the system at minimal resistance. And then make sure that the thermostat is properly calling for cooling and turning the unit on with no errors. All of the cool sequence of operations are successfully testing now verifying that there is a proper 20° split being provided to verify that the home is being cooled efficiently to the desired temperature and the condensation line is accurately draining off the roof to the designated area. The amps on the system are safely, checking out in the correct range to ensure that there is a controlled voltage being used throughout the system safely. I went early, washed the coils down of the unit to remove all dirt debris that may have accumulated on the system. Overall, this Bosch package unit is operating to the manufacturer specs at this time of today’s pr
Today’s annual cooling preventative maintenance consisted of one Bosch package unit. I first be began with replacing the 14 x 24 filter in the home to ensure that proper airflow is able to circulate back to the system at minimal resistance. I then ensure that the ecobee thermostat is properly calling for cooling with no errors. All of the cooling sequence of operations have successfully checked out, verifying that there is a proper temperature split to ensure that the home is being cooled efficiently to the desired temperature I then ensure that the condensation line is dripping off the roof to the designated area properly. The amps on the blower are safely checking out and range verifying a controlled voltage is being used throughout the system and surge protection is still green light good. Overall, this Bosch package unit is operating to the manufacture specs at this time of today’s preventative cooling maintenance.
Arrived at customer’s home to give a price for various electrical projects customer wants to do around the home
Today’s annual cooling preventative maintenance consisted of one unit I first began with replacing the 20 x 30 filter in the upflow system located in the closet area to ensure that proper airflow is able to circulate back to the system at minimal resistance. I then cleared the condensation line to ensure that proper drainage is occurring at this time. The thermostat is properly calling for cooling and turning the unit on properly all of the cooling sequence of operations are successfully checking out, verifying that there is a proper 20° split between the units which verifies the home is being cooled efficiently to the desire temperature following with the amperage testing out in the correct range and the capacitor is also safely testing out, ensuring that there is a controlled voltage being used throughout the system I then thoroughly washed the coils down on the system to remove all during debris that may have accumulated. Overall, there’s 3 ton unit is operating to the manufacturer
Today’s annual calling preventative maintenance consisted of one York package unit located on the roof at first began with replacing the 14 x 25 filter in the home to ensure that proper airflow is able to circulate back to the unit at minimum resistance and then ensure that the thermostat is properly calling for cooling and turning the unit on with no errors. The units condensation line is properly draining off the roof to the designated area. The amps on the system are safely checking out in the correct range, verifying and controlled voltage is being used on the unit following with the proper temperature split from the supply duct, ensuring that the home is being cold efficiently to the desired temperature. Overall, this package unit is operating to the manufactured specs at this time of today’s preventative cooling maintenance.
Check cooling and electrical components everything is working properly
Wash condenser check cooling and electrical components everything is working properly
Performed AC cooling maintenance on (3) 2013 Carrier split systems. Replaced (3) 20x20 ceiling filters. Checked and tested all (3) Ecobee thermostats, homeowners happy with the Ecobee sensors. Cleaned condenser coils, cleaned out electrical compartments. Checked start and run amps, run capacitors, voltages, refrigerant charges/temperature splits (21°-23°). Systems are all cooling properly and refrigerant charges are all good. Found some run capacitors out of range or close, and fo7hs all. 3 systems don’t have start capacitors (hard start kits) and all the compressors are pulling over their maximum rates starting amps (LRA). Pictures attached. Recommended replacement of weak run capacitors to prevent breakdowns as they are the most common component to fail on an air conditioner, and when they fail systems won’t cool. Also recommended adding start capacitors (Hard Start Kits) to assist the compressors on every startup, prolonging the lives of the compressors, especially as they’re all ou
check cooling and electrical components everything is working properly
Arrived at customer’s home to perform a complimentary electrical safety inspection. Upon arrival I found that both main breaker panel and sub panel were pushmatic panels. Informed customer of this and stated that both panels are a fire hazard. Customer stated he’d be remodeling in about a year and panels will be changed then. Also found that there was no surge protection, but I informed customer that whole home surge protection would be done at panel change, but that he should install surge protection on hvac unit to protect it in the meantime. Customer stated he’d call the office to schedule surge protection for hvac unit.
Today’s annual cooling preventative maintenance consisted of one American Standard package unit at first began with replacing the 20 x 25 filter in the home to ensure that proper airflow is able to circulate back to the unit at minimal resistance. I then verified that the Honeywell thermostat is properly calling for cooling and turning the unit on with no errors. I also verified that the condensation line connected to the system is dripping off to the designated area of the roof efficiently with no obstructions. All of the cooling sequence of operations are safely, checking out, providing the proper temperature split in which ensures that the home is being cooled efficiently to the desired temperature. The amps on the blower are safely checking out a range following with the capacitor also testing out in the correct range. I then thoroughly washed the coils down of the unit to remove all dirt debris that may have accumulated on the system. And overall this American standard package uni
Arrived at customer’s home to hang interior chandelier in place of existing track light, hook up exterior chandelier, and hook up exterior spot light for grill. Removed existing track light on interior of home and hung customer supplied chandelier in its place. Took down existing light for grill on exterior and re ran wire to chandelier location. Set box next to spot light and ran wire down to a switch in exterior closet next to grill. Tested and verified all fixtures were operating correctly with customer to complete scope of work for today.
Excellent Service
Michael was great! He was very helpful and he helped me set up the app. He was very knowledgeable and thorough.
Joe was friendly and easy to work with. He was patient and had great communication skills.
Frank was communicative & easy to work with. He did a great job!
Perfect customer service.
I have been a customer of Hydes for many years and have always trusted their advice and depended on the service.
Very knowledgeable, thank you!
Always consistently good and solid
James arrived on time, he accessed the roof, confirmed the unit and found a bad capacitor. I felt relieved and grateful that he found the issue right away and it wasn’t anything major. Great job!
Came out in an emergency and quickly fixed AC. Great service!
Alex efficiently fixed the issue. Much appreciated
Christopher showed up right on time and was very impressed with his performance
Jonathan came to my rescue once again, as he also did 3 years ago in the heat of the Summer!
X
Ahead of schedule. Fast professional and easily diagnosed and fixed the issue. 5 starts!
Maurice was professional, courteous, and on time.
Maurice was very friendly and did a great job, left no mess.
Thor arrived promptly and performed an annual check up. He advised me of an electrical problem and got it resolved right away. He was in and out within 30 minutes. Great service, thanks Thor!
Chris and Jose were very personable and changed our HVAC coil in a timely manner. Hydes is a great company!
Repair
Frank was great as always. On time. Friendly. Knowledge. Doesn’t try to up-sell.
Frank was very courteous and knowledgeable. He explained everything clearly and found where the leak was in our HVAC system. Hydes is a great company!
Thor was scheduled to arrive between two and six, and was here very close to two! He was friendly, polite and tolerant of the barking dogs (!). I complimented him on your scheduling staff and thanked him and you for accommodating us on short notice.
Thor was amazing! He was prompt, agile on that ladder, verbal…and described issues with me. Checked my vents (even though he didn’t have to…and found tools in the vent!!! Hammer, saw and wrench!!! ). Didn’t just look at the system…engaged with it, got in there, looked at stuff, measured stuff, corrected stuff. Hydes came highly recommended to me from a local contractor, and I am very pleased. Reputation matters! Thank you Thor! Stay cool and hydrate! KMG
Very Satisfied