Palm Springs, CA

Performed annual preventative maintenance on all three 2013 90% Carrier split systems. Replaced two 20" x 20" return air filters. Maintenance performed: Inspected all three Ecobee thermostats and verified temperature settings, operating range, and cooling operation. Checked thermostat connectivity and discussed the client's questions regarding the connected Ecobee thermostats. Inspected gas valves and verified proper operation. Inspected burners, flame sensors, and flame characteristics. Checked blower motor amperage on all three systems. Tested blower capacitors on all three systems. All capacitors tested within manufacturer specifications. Inspected and cleaned mini-split filters and coils. Inspected attic-installed equipment, including the system serving the master bedroom and the system serving the family room. Verified proper operation of all three systems. System Operation: All three Carrier systems were operating properly at the time of service. Heating and cooling operations we

Installed 5 Ton American Standard Silver 14 up flow Split Heat Pump Systems

Heating service and safety on 2007 and 2017 equipment. Replaced filters inside home also cleaned mini split filters. Verified gas and electrical connections are secure. Verified blower motors are operating properly. Verified heating sequence of operation is working at this time. Bedrooms equipment in very poor condition well past life expectancy. Fan motor and compressor struggling do to age. Recommend replacing bedrooms equipment to avoid multiple potential problems. Advised on rebates available for limited time-attach options for replacement below also emailed.

Maintenance on an American Standard platinum series 5 ton upflow heat pump. FAU located in the closet customer supplied filter at FAU. Condensation lines cleared filter changed. Verified all electrical and safety. 1050 thermostat shows no active alerts. Check system sequence of operation. Checked FAU,Checked compressor amps, checked fan motor amps, checked inrush, checked Freon and pressure. Verified system is on heating. CDA outdoor monitor shows no active alerts. System is working per manufacture spec. Home is heating properly. Client signed up for bronze maintenance with check.

Maintenance on an American standard gold series 5 ton upflow heat pump. FAU located in the closet by hallway 20 x 25 filter FAU. Condensation line cleared filter changed. Filter was very dirty causing severe airflow restriction. Nest thermostat working properly. Check system sequence of operation. Checked FAU, checked temperature rise, checked condensation line, checked compressor amps, checked fan motor amps, checked, capacitor, checked compressor kit, checked fuses and disconnect box. Upon maintenance noticed outdoor fan motor showing signs of visible oil leaks and reading below intended specs. Low amp draw alone does not mean the motor is bad but it indicates motor is losing performance and not operating at Intended speed causing internal winding and bearing issues. Sent estimate for repair to proactively avoid issues in the future. System is working at time of maintenance.

Loss of power to outdoor ac pro equipment on roof. Repaired electrical short, re established electrical circuit and tested operation. Equipment is working properly at this time. Sighned up on maintenance plan. Recommend routine maintenance on equipment

Performed a heating maintenance on 3 American Standard package unit, changed 3 20x20 & 1 10x30 filter, 2 20x20 filter located inside coil and 1 20x20 on outside plenum and one in casita , flushed condensation line, on unit check for amperage and voltage, followed sequence of operation, check for temperature split, everything within range also clear out dust accumulated inside electrical component area. System is working within specification in heating at the time of maintenance.

Performed an indoor safety maintenance on 3 American Standard Split System. Filters located in ceiling and on bottom wall, fau located on second floor in hallway one in garage and other one outside closet right side of home, filter changed before visit left filters with HO, flushed condensation line, on fau followed sequence of operation, checked for amperage and voltage, checked for blower speed, check for any loose connections, check for temperature rise, everything within range also cleared dust accumulated inside electrical component. Systems are working within specifications in heating at the time of maintenance.

Performed an indoor safety maintenance on an American Standard furnaces. Filters located on bottom wall, fau located in hallway, changed 20x30 filter, flushed condensation line, on fau followed sequence of operation, checked for amperage and voltage, checked for blower speed, check for any loose connections, check for temperature rise, everything within range also cleared dust accumulated inside electrical component. Systems are working within specifications in heating at the time of maintenance.

Changed disconnect.

Performed an indoor safty maintenance on a Lennox handler , Filters located inside filter rack, fua located in Hallway closet, changed 20x25 filter, flushed condensation line, checked for amperage and voltage, checked for blower speed, check for any loose connections, check for temperature rise, everything within range also cleared dust accumulated inside electrical component. System is working within specification in heating at the time of maintenance. Did not answer phone call to renew HFCC left a voicemail.

Heating service and safety check on Goodman split system. Replaced filters located in outdoor closet. Clear drain line and burner compartment. Checked blower motor. Checked heating sequence of operation and verified equipment is operational. Advised Equipment is in poor condition past life expectancy. Recommend equipment replacement to avoid potential breakdowns in airco hey Steve

Short in electrical wires. Previous tech taped wires with electrical though wires were in poor condition with copper exposed. Cut out bad area of wires and rewired.

Replaced breaker.

Installing Gold 3 ton 15 Heat Pump Package Unit Two Stage Cooling. Job complete.

One-System Heating Maintenance and Safety Check Indoor Equipment – Natural Gas Downflow System Performed scheduled heating maintenance and safety check on a natural gas downflow system located in an interior closet. Inspected indoor equipment and cleared electrical components, burner compartment, and equipment platform of accumulated dust and debris. Inspected electrical wiring and connections, checked operating voltage, and verified proper operation of heating components. Inspected blower motor and blower wheel assembly. Checked blower motor operating amperage at 2.49 amps, which was within specifications. Also tested the blower motor run capacitor and verified it was within the manufacturer’s specified range. Inspected and replaced the 20×30 filter located at the blower return grille. Inspected heating components, verified proper sequence of heating operation, and cycled equipment through the heating cycle to confirm proper performance. Checked heating temperatures at supply r

Performed an indoor safety maintenance on 1987 furnaces. Filters located inside the furnace, fau located in hallway closet, changed 16x25 filter, flushed condensation line, on fau followed sequence of operation, checked for amperage and voltage, checked for blower speed, check for any loose connections, check for carbon monoxide, check for temperature rise, check for capacitor, everything within range also cleared dust accumulated inside electrical component. Systems are working within specifications in heating at the time of maintenance. Gave Starbucks gift card

I Performed Maintenance on the Heating System. Also replaced a 20x25 filter. The system is a 2025 American Standard Heat Pump package unit located on the roof. Cleaned condenser coils, took temperature split, inspected blower motor compartment, and evaporator coil. System is very clean and working properly. At the time of today’s maintenance visit the system checked out operational. Scheduled next maintenance visit and gave client Starbucks Card.

Upon arrival, found that bedroom unit was not cooling down the house properly. Found that system outdoor unit was on a hard lockout restarted system, and then outdoor unit came on. Checked all electrical electrical within the range. Found that system was low on refrigerant as shown in pictures. Recommended to Client to at least add 2 pounds of refrigerant today to help bring system closer to max specifications. Client agreed after adding 2 pounds system is now cooling down the bedroom correctly. Informed Client next time we come out, we will see if system is again low on refrigerant or if it’s holding refrigerant. Checked both systems and heating mode. Both systems are heating up the house properly finish maintenance by cleaning out condensation lines located in attic access as well as by changing out filters.

Called member and confirmed appointment for November 7 between the hours of 2–5 p.m. for installment of circuit board.

I Performed Maintenance on the Heating System. Also replaced a 20x25 filter and flushed the condensate drain. The system is a 2013 model located in the inside closet. I also cleaned inside blower motor compartment. Tested water safety switch for proper operation. Cleaned out burners furnace. Verified heating sequence of operation is working properly according to manufacturer specifications. Checked and detected zero carbon monoxide. Checked temperature rise. Thermostat checked out properly. System is working properly in heating at this time of service. Scheduled next maintenance visit online and gave client Starbucks Card. Advised client that it will be time to renew on the spring card.

Completed a heating maintenance on a single package unit located on the rooftop. Checked all electrical components, inspected the system’s operation, and verified proper heating performance and temperature rise. Cleaned the condensation line to ensure proper drainage and changed the air filter. Inspected the unit’s overall condition and made sure all components were operating within manufacturer specifications. After completing the heating maintenance, I switched the system back into cooling mode and confirmed it was operating properly. No issues were noted at this time.

Completed a heating maintenance on one gas furnace located in the hallway closet. Inspected the system’s electrical components and verified proper operation and temperature rise, all within manufacturer specifications. Cleaned the condensation drain line and changed the air filter. Explained the benefits of installing a Jhones valve to the client, including helping maintain proper drainage and making future condensation line maintenance easier. The client agreed to the installation, and the Jhones valve was installed. Verified that the condensation system is draining properly and confirmed the system was switched back into cooling mode and operating correctly. No errors or alerts were present during the maintenance. A Starbucks gift card was also provided to the client as a courtesy.

Arrived at customer’s home to diagnose outlets non op on exterior of home. Found that there was a tripped gfci outlet in the kitchen. Reset gfci outlet and this restored power to only one of the affected outlets. Could not trace the source of the other affected outlets, but customer also stated that she is having pool work done, and they disconnected all pool equipment from power while they work on equipment. Informed customer that the pool guys should finish their work first and get power fed back to pool panel before we continue the diagnostic or figure out how to re feed outlets.

Arrived at customer’s home to diagnose landscape lights non op. Found that landscape transformer for the breezeway was bad and not responding. Informed customer of this and informed him that the other affected lights may be on the same transformer, so we should replace the bad transformer first, then complete a diagnostic on the rest of the non op lights in the front yard. Customer agreed and signed an estimate for us to come back and replace the transformer with a diagnostic.