Expert AC Contractor Services Tailored for Palm Springs Residents
Since 1972, Hydes Air Conditioning has been providing HVAC contractor services including repair, installation and maintenance to residents in Palm Springs. With over 50+ years serving the area, Hydes is proud to be your preferred 5 star local service provider for all your AC repair and installation needs with 2,600+ Palm Springs reviews below.
Whether you need immediate AC repair, a full system replacement, or preventative maintenance, our approach is built on technical NATE certified expertise, transparent service, and measurable results.
Call today at (760) 360-2202 for your home's HVAC service solutions or contact us online with any questions!
See what your neighbors are saying about our service below!
Need an Electrician in Palm Springs?
We've also added residential electrical service in Palm Springs to our family of home contractor services to better serve the Coachella Valley community.
Palm Springs AC Repair and Service
When it comes to AC repair, installation, maintenance and tune-ups, there’s no better company to call than our team of N.A.T.E. certified HVAC experts near Palm Springs, CA.
-
AC repair for refrigerant leaks, compressor issues, and airflow restrictions
-
New air conditioner installation and system sizing
-
High-efficiency upgrades to reduce energy consumption
-
Seasonal AC tune-ups to prevent costly breakdowns
Ensure your system delivers consistent cooling without overworking components or inflating energy bills.
Why is my AC unit running but not cooling?
Your AC unit may be running but not cooling your home in Palm Springs, CA because:
- Air filters are blocked
- AC unit has a refrigerant leak
- The evaporator coil is dirty or frozen
If you replace your air filters and set your thermostat correctly and it is still not working properly, you should have an HVAC technician repair your AC unit.
How much does AC repair service cost near me?
Minor AC repairs, such as fuses, breakers or thermostat replacement, cost between $150 and $290. You can expect to spend $200 to $1,500 on substantial repairs such as repairing a refrigerant leak or evaporator coil.
Get the Best AC Service Near You
Hydes makes sure to offer you options and practical solutions to fix quickly and get your home cool again quickly 24 hours a day. When your air conditioner starts acting up, it's crucial to address the issues promptly to avoid discomfort and costly repairs down the line.
Common AC Problems in Palm Springs
- Overheating Issues: In our desert climate, AC units often struggle with overheating. This can lead to system shutdowns and reduced cooling capacity.
- Refrigerant Leaks: Leaking refrigerant not only affects cooling but also poses environmental hazards. Prompt repair is essential to prevent further leaks and damage.
- Airflow Problems: Restricted airflow can result from clogged filters or duct obstructions. It reduces cooling efficiency and strains the system.
AC Installation and Replacement
When it comes time to replace your home's air conditioner, you want a licensed HVAC technician to install your new system, and a large investment, the right way. Our team is ready to provide you with a new energy-efficient heat pump and cooling system to keep your home comfortable all year long.
We'll assess your cooling needs, recommend the best options for your space, and handle the installation process from start to finish. Hydes also offers financing for all your HVAC solutions.
High-Efficiency Equipment Options
Hydes will install systems designed to reduce operating costs while improving indoor comfort:
-
Variable-speed air handlers
-
Two-stage and modulating furnaces
-
Smart thermostats with adaptive learning
-
Zoned HVAC systems for targeted comfort control
Energy Efficiency Upgrades That Pay Off
Hydes will focus on measurable efficiency gains that reduce operational costs:
-
SEER and AFUE optimization through modern equipment
-
Smart thermostat integration for automated energy control
-
Duct sealing to eliminate energy loss
-
System balancing to improve airflow distribution
These upgrades translate into immediate savings and long-term ROI.
How much does it cost to replace an AC system?
It will cost between $3,500-$12,000+ to replace an air conditioning unit in Palm Springs, CA. Price will vary based on several factors:
- The size of your house.
- The type of air conditioning unit you have installed.
- The cost to remove your current AC unit.
Heating System Services That Keep You Warm
We provide full-spectrum heating services designed to handle every system type and configuration:
-
Furnace repair and replacement (gas, electric, high-efficiency units)
-
Heat pump diagnostics and installation
-
Boiler service and hydronic heating solutions
-
Emergency heating repair with rapid response times
Our technicians diagnose root causes, not symptoms, ensuring your heating system operates safely and efficiently through peak demand seasons.
HVAC Maintenance Tune-Up Service
Keeping your unit running effectively and efficiently requires regular service. Call us for AC maintenance and tune-up services that will prevent breakdowns and keep your system running well for years.
DIY AC Maintenance Tips for Palm Springs Residents
While professional help is crucial for complex issues, homeowners can also take some steps to maintain their AC units:
- Changing Air Filters Regularly:Clean filters ensure proper airflow and prevent dust buildup within the system.
- Clearing Debris Around the Unit:Keep the area around the outdoor unit clear of debris, vegetation, and obstructions for efficient operation.
Whether your air conditioning unit isn’t cooling your home or you need routine maintenance service, don’t suffer in the heat – give us a call today!
How much does heating and cooling maintenance cost?
For simple tune-ups, regular HVAC maintenance costs $75 to $200. Extended service contracts range from $150 to $500 and cover the entire HVAC system, including heating and cooling.
Indoor Air Quality Solutions for Healthier Living
Comfort goes beyond temperature. Hydes will improve your indoor air quality by using advanced solutions:
-
Whole-home air purifiers and filtration systems
-
Humidity control (humidifiers and dehumidifiers)
-
UV light systems to neutralize airborne contaminants
-
Duct cleaning and sealing services
Cleaner air supports respiratory health and enhances overall comfort throughout your home.
Why Our HVAC Services Deliver Superior Results
We combine technical precision with customer-focused service to deliver consistent outcomes:
-
Highly trained NATE certified HVAC technicians
-
Transparent pricing and detailed service reporting
-
Industry-leading equipment and tools
-
Proven track record of system optimization
-
Commitment to long-term customer satisfaction
Local HVAC Contractors You Can Trust
We’d love to earn your business in Palm Springs, CA!
See what your neighbors are saying about our HVAC installation, repair and maintenance services below.Â
Recent Jobs and Reviews in Palm Springs, CA
Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting high levels of customer satisfaction and appreciation for the service provided. Customers consistently express gratitude and praise for the professionalism, knowledge, and courtesy demonstrated by the technicians. Recurring themes include exceptional customer service, with technicians being described as friendly, respectful, polite, and professional throughout their interactions. Technical expertise is another dominant positive trend, as customers frequently commend the thorough diagnostics, efficient problem-solving, and clear explanations provided during service calls. Many reviewers highlight the promptness and reliability of the service, noting quick response times, punctuality, and efficient completion of work. The dedication to resolving complex or frustrating situations is particularly appreciated, with several customers expressing relief and happiness at having their HVAC and electrical issues successfully addressed. There is also notable appreciation for the transparency and honesty in service delivery, with customers valuing straightforward communication without unnecessary upselling. Long-term customer loyalty emerges as a theme, with multiple reviewers mentioning years of positive experiences and enthusiastic recommendations to neighbors and friends. The overall tone is one of trust, satisfaction, and genuine appreciation for quality workmanship and customer-focused service.
Palm Springs, CA at a glance
Hydes Air Conditioning has completed 25 jobs in Palm Springs, CA in February 2026.
The most recent job was on February 21, 2026.
Hydes Air Conditioning has completed 1,396 jobs in Palm Springs, CA in the last 12 months. The first job there was in March 2014.
Our Local Reviews by City
- Banning, CA (1)
- Bermuda Dunes, CA (862)
- Cathedral City, CA (1235)
- Chiriaco Summit, CA (9)
- Coachella, CA (118)
- Desert Hot Springs, CA (394)
- Indian Wells, CA (1672)
- Indio, CA (9189)
- Joshua Tree, CA (2)
- La Quinta, CA (6827)
- North Palm Springs, CA (8)
- Palm Desert, CA (17249)
- Palm Springs, CA (2753)
- Rancho Mirage, CA (3874)
- Thermal, CA (9)
- Thousand Palms, CA (273)
Job Locations and Reviews
Service on 2021 Lennox equipment. Found faulty high voltage disconnect box. Installed new disconnect box with fuses and tested operation. Equipment is working properly according to manufacturer specifications.
Send sample pictures
Quote to replace 81 land scape lights
No show office left message client re scheduled
Today’s annual heating maintenance consisted of one up flow furnace located in the closet access on the side of the house. I ensure that the nest thermostat is properly calling for heat and turning the system on successfully. I then make sure that the filter was replaced. Replacing the filter on the system ensures that proper airflow is able to circulate back to the system at minimum resistance on the unit. All of the heating sequence of operation successfully checked out safely, igniting the flame on the system and providing the proper temperature supply check to ensure that the home is being warm to the desired temperature. The amps on the system are checking out safely in the correct range confirming there’s a controlled voltage being used throughout the system. Overall, this furnace is operating to the manufactured specs at this time of its prevent preventative heating maintenance.
Performed a heating maintenance on a heat pump air handler (technician notes). Replaced filter and cleared condensate drain line. Relocated blower capacitor to the front. Perform refrigerant circuit diagnostic. Documented temperature heat rise and blower motor amp draw. Examined evaporator coil and blower wheel. Cycled system in both heating and cooling. Thermostat – OK. System is servicing the home at the time of maintenance.
Gave customer estimate for replacing all landscape lighting around home. Back and front separate, and $400 discount added to front home work.
Set gas pressure to 3.6 and bypassed pressure switch to verify unit is operational. Went through all checks with tech support on transducer and pressure switch. Pressure switch is a positive pressure and is operating without hose from pressure switch to burner box. Per tech support it is operational at this time though they will use all information gathered on site today and get back to us with further instructions. Client to pay balance in full and is leaving tomorrow.
We replaced a Bosch package unit coil under warranty. We had to climb up 2 stories of ladders with all equipment, removed and reinstalled new coil, pressurized and charged with 410A refrigerant.
Today’s an annual heating maintenance consisted of one American standard air handler located in the closet axis I first begin with replacing the one filter in the home to ensure there’s proper airflow, circulating back to the unit at minimum resistance, ensuring that the filter is cleaned helps ensure there is a proper airflow circulating throughout the unit. I then make sure that the Honeywell thermostat is properly calling for heat and turning the system on all of the heating sequence of operation successfully checked out, verifying that the home is being warm to the proper temperature. The temperature supply check is also in the correct range verifying that it is warming to the correct temperature and then I cleared the condensation line to ensure that it is properly draining at this time of preventative maintenance. The amps on the system are checking out safe safely in the correct range verifying there’s a controlled voltage being used throughout the unit. I am going to go ahead a
Today’s annual maintenance consisted of one American standard furnace located in the attic access. They first begin with replacing the filter on the home to ensure proper airflow is circulating back to the system at minimum resistance and then make sure that the Honeywell thermostat is properly calling for heat and turning the unit on properly all of the heating sequence of operation successfully checked out, ensuring that the home is being warmed to the desired temperature the amps on the system are checking out in the correct range verifying a controlled voltage is being used throughout the unit. I also cleared the condensation line to ensure that it is properly draining at this time of service. All of the heating sequence of operations have successfully checked out, warming the home to the desired temperature safely, and efficiently. Overall, this American standard furnace is operating to the manufacture specs at this time of prevent preventative maintenance.
Today’s annual maintenance consisted of one American standard unit located in the closet access I first begin with replacing the filter on the unit to ensure proper airflow circulating back into the home, minimal resistance. I then cleared the condensation line via Jonesville to ensure proper drainage is occurring on the unit, and I located the condensation line at the side of the building to ensure that it is properly draining. The Emerson thermostat properly called for heat. Enter the system on all of the heating sequence of operations have successfully checked out, verifying that the home is being warm to the desired temperature and the amps are testing out in the correct range ensuring there’s a controlled voltage being used throughout the system safely and the temperature supply check is also in range. Confirm confirming that the home is being warm to the desire temperature overall this American standard unit is operating to the manufacture specs at this time of preventative maint
Performed a heating maintenance on a Goodman, gas furnace located in hallway closet. Check sequence of operations by checking out all electrical temperature. At this time system is heating up the house properly finish maintenance by explaining the great benefits of a hard start kit sent estimate via email.
Alert 6 flashes pressure switch aka burner pressure switch open. Equipment runs for min then kicks off. Adjusted gas pressure to 3.5 and same issue. Once flame starts very odd combustion sound in burner compartment. Checked burner compartment for air gap. Verified air intake is clear. Bypassed pressure switch and unit runs though very loud combustion inside burner box. Contacted Jim at us air. Will follow up Tuesday once we have information from tech support.
Hung three exterior sconces as per customer, but as I was finishing up he stated the he lost power to half his house. Once sconces were completed, I proceeded to perform a diagnostic on non op outlets/lights. Found that gfci on back porch was protecting the circuit and was not resetting. Put load wires on line side of gfci and replaced gfci to restore power and resolve issue. Customer stated that we can send him quote for landscape lighting at our convenience.
Installing 4 Ton York ton 13.4 SEER Gas Package unit and 37 Gallon lowboy hot water heater including outdoor electrical box.
Performed annual heating maintenance on a 2025 American Standard heat pump package unit. Replaced 20x25 filter located in hallway ceiling. No ladder is needed. Followed sequence of operations and checked voltage, amperage, capacitor, temperature rise, Freon levels, and secured all electrical connections. Client stated unit made a loud vibrating sound at start up but hasn’t done so recently, cycled equipment and noise was to normal operating standards. Informed client of iso pads and possible seismic springs if noise persists. Nest thermostat checked out okay. System is working properly in heating at this time of service. Scheduled cooling maintenance with client on site.
Performed annual heating maintenance on a 2017 Goodman package unit. Replaced 14x24 filter located in hallway ceiling. Drill needed. Cleaned out burners furnace. Verified heating sequence of operation is working properly according to manufacturer specifications. Checked and detected zero carbon monoxide. Checked temperature rise. Checked capacitor and hard start kit. Thermostat checked out operational. System is working properly in heating at this time of service.
Dropped off permit and verified equipment is ready for inspection.
Emailed estimate with Hyde's promotion of free ductless heat pump.
Inspected guest room for mini split installation. Documented everything with photos. Home has 2 split systems, micro channel condensers in front yard, upflow furnaces in garage closet. Spoke with daughter Susan. Informed her systems are older, have refrigerant issues, and will have one of the owners/Hydes brothers to reach out. Email and phone call. She stated she’s in Portland and sometimes not available so email and phone call will be good to go over options. Parents and caregiver are at residence so in person estimate won’t work and to go with email and phone call. Per my findings, systems should be replaced, and mini split looks feasible to install for guest room.
Dropped off permit for inspection. Replaced 50amp breaker and fuses down to a 40amp to match max rated amps on data plate. System is up to code and ready for inspection.
Arrived at customer’s home to label panel to get ready for final inspection. Went through all circuits in home and labeled them accordingly based on what they control.
Performed annual maintenance in heat on 2 carriers one horizontal other up flow , followed Sequence of operation Changed filters checked amps voltage blower motor capacitors limit switches safety switches working at range cleared burners cycled burners cleared condensation lines units are working to manufacture specification in heat
Maintenance for heat on an American standard silver series up low-key pump filter 20 x 23 put sideways underneath FAU FAU located in a closet outside in front of the condensing unit. Check systems of operation checked all electrical safety cleared condensation line checked outside unit check compressor ramps, checked fan motor, check capacitor, check Freon and pressure system is working per manufacture specifications. Office is heating properly.