Expert AC Contractor Services Tailored for Palm Springs Residents
Since 1972, Hydes Air Conditioning has been providing HVAC contractor services including repair, installation and maintenance to residents in Palm Springs. With over 50+ years serving the area, Hydes is proud to be your preferred 5 star local service provider for all your AC repair and installation needs with 2,600+ Palm Springs reviews below.
Whether you need immediate AC repair, a full system replacement, or preventative maintenance, our approach is built on technical NATE certified expertise, transparent service, and measurable results.
Call today at (760) 360-2202 for your home's HVAC service solutions or contact us online with any questions!
See what your neighbors are saying about our service below!
Need an Electrician in Palm Springs?
We've also added residential electrical service in Palm Springs to our family of home contractor services to better serve the Coachella Valley community.
Palm Springs AC Repair and Service
When it comes to AC repair, installation, maintenance and tune-ups, there’s no better company to call than our team of N.A.T.E. certified HVAC experts near Palm Springs, CA.
-
AC repair for refrigerant leaks, compressor issues, and airflow restrictions
-
New air conditioner installation and system sizing
-
High-efficiency upgrades to reduce energy consumption
-
Seasonal AC tune-ups to prevent costly breakdowns
Ensure your system delivers consistent cooling without overworking components or inflating energy bills.
Why is my AC unit running but not cooling?
Your AC unit may be running but not cooling your home in Palm Springs, CA because:
- Air filters are blocked
- AC unit has a refrigerant leak
- The evaporator coil is dirty or frozen
If you replace your air filters and set your thermostat correctly and it is still not working properly, you should have an HVAC technician repair your AC unit.
How much does AC repair service cost near me?
Minor AC repairs, such as fuses, breakers or thermostat replacement, cost between $150 and $290. You can expect to spend $200 to $1,500 on substantial repairs such as repairing a refrigerant leak or evaporator coil.
Get the Best AC Service Near You
Hydes makes sure to offer you options and practical solutions to fix quickly and get your home cool again quickly 24 hours a day. When your air conditioner starts acting up, it's crucial to address the issues promptly to avoid discomfort and costly repairs down the line.
Common AC Problems in Palm Springs
- Overheating Issues: In our desert climate, AC units often struggle with overheating. This can lead to system shutdowns and reduced cooling capacity.
- Refrigerant Leaks: Leaking refrigerant not only affects cooling but also poses environmental hazards. Prompt repair is essential to prevent further leaks and damage.
- Airflow Problems: Restricted airflow can result from clogged filters or duct obstructions. It reduces cooling efficiency and strains the system.
AC Installation and Replacement
When it comes time to replace your home's air conditioner, you want a licensed HVAC technician to install your new system, and a large investment, the right way. Our team is ready to provide you with a new energy-efficient heat pump and cooling system to keep your home comfortable all year long.
We'll assess your cooling needs, recommend the best options for your space, and handle the installation process from start to finish. Hydes also offers financing for all your HVAC solutions.
High-Efficiency Equipment Options
Hydes will install systems designed to reduce operating costs while improving indoor comfort:
-
Variable-speed air handlers
-
Two-stage and modulating furnaces
-
Smart thermostats with adaptive learning
-
Zoned HVAC systems for targeted comfort control
Energy Efficiency Upgrades That Pay Off
Hydes will focus on measurable efficiency gains that reduce operational costs:
-
SEER and AFUE optimization through modern equipment
-
Smart thermostat integration for automated energy control
-
Duct sealing to eliminate energy loss
-
System balancing to improve airflow distribution
These upgrades translate into immediate savings and long-term ROI.
How much does it cost to replace an AC system?
It will cost between $3,500-$12,000+ to replace an air conditioning unit in Palm Springs, CA. Price will vary based on several factors:
- The size of your house.
- The type of air conditioning unit you have installed.
- The cost to remove your current AC unit.
Heating System Services That Keep You Warm
We provide full-spectrum heating services designed to handle every system type and configuration:
-
Furnace repair and replacement (gas, electric, high-efficiency units)
-
Heat pump diagnostics and installation
-
Boiler service and hydronic heating solutions
-
Emergency heating repair with rapid response times
Our technicians diagnose root causes, not symptoms, ensuring your heating system operates safely and efficiently through peak demand seasons.
HVAC Maintenance Tune-Up Service
Keeping your unit running effectively and efficiently requires regular service. Call us for AC maintenance and tune-up services that will prevent breakdowns and keep your system running well for years.
DIY AC Maintenance Tips for Palm Springs Residents
While professional help is crucial for complex issues, homeowners can also take some steps to maintain their AC units:
- Changing Air Filters Regularly:Clean filters ensure proper airflow and prevent dust buildup within the system.
- Clearing Debris Around the Unit:Keep the area around the outdoor unit clear of debris, vegetation, and obstructions for efficient operation.
Whether your air conditioning unit isn’t cooling your home or you need routine maintenance service, don’t suffer in the heat – give us a call today!
How much does heating and cooling maintenance cost?
For simple tune-ups, regular HVAC maintenance costs $75 to $200. Extended service contracts range from $150 to $500 and cover the entire HVAC system, including heating and cooling.
Indoor Air Quality Solutions for Healthier Living
Comfort goes beyond temperature. Hydes will improve your indoor air quality by using advanced solutions:
-
Whole-home air purifiers and filtration systems
-
Humidity control (humidifiers and dehumidifiers)
-
UV light systems to neutralize airborne contaminants
-
Duct cleaning and sealing services
Cleaner air supports respiratory health and enhances overall comfort throughout your home.
Why Our HVAC Services Deliver Superior Results
We combine technical precision with customer-focused service to deliver consistent outcomes:
-
Highly trained NATE certified HVAC technicians
-
Transparent pricing and detailed service reporting
-
Industry-leading equipment and tools
-
Proven track record of system optimization
-
Commitment to long-term customer satisfaction
Local HVAC Contractors You Can Trust
We’d love to earn your business in Palm Springs, CA!
See what your neighbors are saying about our HVAC installation, repair and maintenance services below.
Recent Jobs and Reviews in Palm Springs, CA
Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting high levels of customer satisfaction and appreciation for the service provided. Customers consistently express gratitude and praise for the professionalism, knowledge, and courtesy demonstrated by the technicians. Recurring themes include exceptional customer service, with technicians being described as friendly, respectful, polite, and professional throughout their interactions. Technical expertise is another dominant positive trend, as customers frequently commend the thorough diagnostics, efficient problem-solving, and clear explanations provided during service calls. Many reviewers highlight the promptness and reliability of the service, noting quick response times, punctuality, and efficient completion of work. The dedication to resolving complex or frustrating situations is particularly appreciated, with several customers expressing relief and happiness at having their HVAC and electrical issues successfully addressed. There is also notable appreciation for the transparency and honesty in service delivery, with customers valuing straightforward communication without unnecessary upselling. Long-term customer loyalty emerges as a theme, with multiple reviewers mentioning years of positive experiences and enthusiastic recommendations to neighbors and friends. The overall tone is one of trust, satisfaction, and genuine appreciation for quality workmanship and customer-focused service.
Palm Springs, CA at a glance
Hydes Air Conditioning has completed 25 jobs in Palm Springs, CA between January 2026 and February 2026.
The most recent job was on February 9, 2026.
Hydes Air Conditioning has completed 1,396 jobs in Palm Springs, CA in the last 12 months. The first job there was in March 2014.
Our Local Reviews by City
- Banning, CA (1)
- Bermuda Dunes, CA (862)
- Cathedral City, CA (1235)
- Chiriaco Summit, CA (9)
- Coachella, CA (118)
- Desert Hot Springs, CA (394)
- Indian Wells, CA (1672)
- Indio, CA (9189)
- Joshua Tree, CA (2)
- La Quinta, CA (6827)
- North Palm Springs, CA (8)
- Palm Desert, CA (17249)
- Palm Springs, CA (2753)
- Rancho Mirage, CA (3874)
- Thermal, CA (9)
- Thousand Palms, CA (273)
Job Locations and Reviews
Performed annual maintenance in heat on one temp star ultra low nox and Bryant up flows location garage, followed Sequence of operation Changed both 20x25 filters in furnace, checked amps voltage limit switches safety switches working at range cleared burners cycled burners units are working to manufacture specification in heat, upon arrival temp star unit last 4 9266 was going off on high limit reset limit tested if it happens again we will order part , filters where dirty recommend reme halos sent estimate, installed water safety switches and Jone valves to prevent water damage if water backs up
Performed annual maintenance in heat on 2 Goodman up flows location hallway closet, followed Sequence of operation Changed filters checked amps voltage limit switches safety switches blower motor capacitors working at range cleared burners cycled burners cleared condensation lines, units are working to manufacture specification in heat
2011 model check cooling and electrical components everything is working properly temp split 22,,,,recommend comfort plan
service cooling upon arrival client stated unit not keeping up with temperature after further inspection found evap coil need to be replace do to coil is leaking refrigerant,,,,,coil is cover,,,,labor is not advice client I order coil it will take 5 to 10 day
Arrived at customer’s home to diagnose landscape lights non op and entry gate coach lights non op. Found that both problems were not related to work previously done. Found that the line between two landscape lights was bad and bleeding voltage. Informed customer and gave her a price for running a new line between the fixtures to eliminate issue and restore function to fixtures. Upon further inspection of coach lights, I found that the lights did turn on when time clock was turned on. Informed customer that both feeds to those lights were improperly done (romex ran underground in pvc) and will fail in the future. Customer will keep an eye on fixtures operation and run new line when they fail again.
Performed application with homeowner customers approved
Arrived to replace the existing panel with a new, solar-ready panel. Adjusted the conduit for the solar connection to accommodate the increased height of the new panel. Reconnected all wiring identical to the previous setup and tested voltage on the new panel. All systems are functioning properly. A follow-up visit will be scheduled to label the panel accordingly.
Cooling maintenance on American standard split POV system. Air handler is located in. Hallway closet and filter is 20 x 25 located in filter rack. Changed out filter, condensation line was cleared at Jones valve, added riser to allow safety switch to operate properly, verified proper operation for safety switch, verified proper sequence of operation, washed condensing coil. Thermostat checked out OK. System is within Manufacturers specifications, and heating and operating properly at this time of service.
Office notes. Installed and setup Ecobee sensors , one for family room and one in guest bedroom. Both reading on phone app and thermostats.
After Diagnostic found unit going off on high limit performed temperature rise in range at 45 ordered from Howard under warranty sent estimate for repairs
Check out air conditioner for estimate on new unit. Unit is a 2021 model and appears in good shape. . 30 amp breaker was tripped, reset and unit ran ok. Recommend maintenance plan to confirm correct operation and amp draw.
Talked to client I was here last winter advised client we had to replace the parts to get the heater going. Client stated she will not spend $1000 on this unit. She wants to replace going to talk to her daughters. She will get back to us.
Heating service on 2017 American standard split system. Furnace is located in outside closet, filter is 20 x 25 and located within furnace cabinet. Changed out filter, cleared condensation line, verified proper operation for water, safety switch, cleared all electrical components, and burners of dust and debris, Verified proper sequence of operation, zero carbon monoxide detected, thermostat checked out OK. System is within manufacturers specifications and heating and operating properly at this time of service. Also schedule next maintenance appointment with member for June 29 between the hours of 2 PM – 5 PM
Installed limit switch tested and performed maintenance in heat changed filter checked amps voltage capacitor limit switches working at range cleared burners cycled burners cleared condensation line unit is working to manufacture specification in heat
Dropped off permit and verified of that system is ready for inspection. (See photos
Arrived to remove and replace two landscape flood light fixtures, one located adjacent to the tennis court and the other mounted on a tree. Replaced one uplight positioned next to a tree in the backyard. Additionally, replaced five fluorescent bulbs in landscape fixtures for five floodlights.
Today’s annual maintenance consisted of one American standard up furnace located in the closet access I first began with replacing the filter on this unit to ensure proper airflow is circulating back to the system at minimum resistance, making sure there is minimum resistance ensures that the system is not overworking itself. I then make sure that the 1050 thermostat is properly operating and calling for a heat. I also updated the thermostat for the client. It had a software update and I assisted him with finalizing the update and ensuring that the thermostat is operating properly all of the heating sequence of operation successfully checked out on the unit confirming that there is a proper temperature supply and that the home is being warmed safely and efficiently to the desired temperature. I then cleared the condensation line efficiently to ensure that it is draining at this time of service. I cleared it a handful of times because the end of the exit point was covered with some dirt
Executed a heating maintenance on an upflow gas furnace and a split heat pump. Gas furnace executed the sequence of operation in heating. Documented temperature heat rise. Replace filters and cleared condensate drain line. Refrigerant circuit diagnostic on heat pump – good. Checked delta-T. Both systems are functioning according to manufacture specifications.
Maintenance for heat on two 4 ton American standard silver upflow heat pumps FAU located in the closet outside filters are two 20 x 25 inside of a filter rack. Condensation line cleared filters changed Honeywell thermostat working properly. Both systems came on checked FAU for mode of heat checked amperage checked outside unit checked fan motor capacitor and compressor amps both systems are working per manufacturer specification home is heating properly.
Quoted on a American Standard pack of heat pump
Performed a heating maintenance on 2025 American standard furnace, Filters located inside filter rack, fau located in closet upflow, changed filter, flushed condensation line through jones valve, on fau followed sequence of operation, checked for amperage and voltage, checked for blower speed, check for any loose connections, check for temperature rise, everything within range also cleared dust accumulated inside electrical component. System is working within specification in heating at the time of maintenance.
We cut in a new return filter grill 10x20 for the bedroom to increase efficiency of system
Performed a heating maintenance on 2024 first company, Filters located inside unit, unit located in hallway , changed filter, flushed condensation line, on unit followed sequence of operation, checked for amperage and voltage, checked for blower speed, check for any loose connections, check for temperature rise, everything within range also cleared dust accumulated inside electrical component. System is working within specification in heating at the time of maintenance.
Performed heating maintenance on a 2005 20+ package unit. Filter replaced by HO before visit filter is located in the hallway ceiling. Flushed the condensate drain line. Inspected the unit and verified proper sequence of operation. Checked voltage and amperage readings. Tested for carbon monoxide with no unsafe levels detected. Inspected capacitors; all three capacitors were found to be out of range and rusted creating false contact, and the compressor is over-amping, indicating potential failure. Checked temperature split, which is currently within acceptable range. Cleaned and removed dust buildup from the electrical component compartment and rinsed the unit coil. At the time of service, the system is operating in heating mode, however, the unit is in poor overall condition. Scheduled an appointment to provide an estimate for unit replacement.
Performed heating maintenance on (3) split systems. Replaced filters. Drain lines cleared. Checked all heating, safety, and electrical components, all are working properly. Zero carbon monoxide detected. Heating sequence of operations was performed properly. Checked heat rise and heat pump temp rise (30°). All systems are heating properly and safely at time of maintenance.